STANAG 5066 Message Parser

 

Availability

 

SkySweeper STD : NO

SkySweeper STD+ : YES

SkySweeper PRO : YES

 

General description

STANAG5066 protocol is typically used with the modern NATO modems like STANAG4285 and STANAG4539. The parser opens the used data transper protocol D PDUs (PDU=Protocol Data Unit) and prints the data out from them. The STANAG PDU consists of header (header has two parts common and PDU specific) and the data (called also C_PDU). The header and the data have their own CRCs (checksums).

 

Configuration

Pressing the ‘Configure’ button in STANAG 4285 configuration dialog opens the following Configuration Dialog box.

 

 

 

 

Parameters

STANAG 5066 Print Format

This selects the main print format (decimal or hexadecimal).

       

STANAG 5066 Data Transfer Protocol

There are several print options, which can be used to control the DTP prints:

 

Print Header CRC Failed - prints headers even CRC has failed

Print Common Header - prints the common header of the message

Print C_PDU - prints the C_PDU (=data) of the message

Print C_PDU CRC failed - prints the data even CRC has failed

Print PDU specific header - prints the PDU specific part of the header

 

If the scroll checkbox is selected, a picture is scrolled from bottom up. Otherwise, drawing is started at the top and then re-started at the top, when the picture area is full.

 

Print D_PDU

The printed D_PDU message types can be selected here.